Proscenic Robot Vacuum Cleaner
Robot Vacuum Cleaner
Cordless Vacuum Cleaner
Robot Vacuum Cleaner
Cordless Stick Vacuum
Book a repair or service
Register Your Product
Proscenic Affiliate Marketing Program rules
How To Win
Your cart is empty
POPULAR SEARCH TERMS
How to Use
Robot cannot be activated.
*Make sure the main power switch is in the ON position
*Make sure the battery is fully charged.
*Replace the batteries (2*AAA) in the remote control.
*Make sure the remote control is within the range (16ft/5m) of robot.
*If you still cannot solve it, turn off the main power switch and then turn it on again.
The remote control does not work.
*Replace the batteries in the remote control.
*Make sure the robot is turned on and fully charged.
Robot stops working suddenly.
*Check if robot is trapped or stuck on an obstacle.
*Check if the battery level is too low.
*If you still cannot solve it, turn off the main power switch, wait for 2 seconds, and then turn it on again.
You can'tschedule cleaning.
*Make sure the main power switch on the bottom of robot is turned on.
*Make sure the time (AM/PM), and the scheduled time have been set correctly.
*Check if robot’s power is too low to start cleaning.
Suction power is weak.
*Check if any obstructions are blocking the suction inlet.
*Empty the dust bin.
*Clean the filters with a cleaning brush.
*Check if the filters are wet caused by water or other liquid on the floor. Air-dry the filters completely before use.
Robot can’t be charged.
*Check if the indicator light on the charging dock is on. If not, contact the service center to repair or replace the charging dock.
*Remove the dust on the charging contact pins with a dry cloth.
*Check if you can hear a beep when the robot is returned to the charging dock. If not, contact the service center to repair or replace the charging dock.
Robot can’t return to the charging dock.
*Remove objects within 3ft/1m to the left and right side and within 6ft/2m of the front of the charging dock.
*When the robot is in the range of the charging dock, it will return more quickly. However, if the charging dock is located far away, the robot will need more time to return. Please be patient as it works its way back.
*Clean the charging contact pins.
The rolling brush doesn’t rotate.
*Clean the rolling brush.
*Check if the rolling brush has been installed properly.
Robot movements or travel paths are abnormal.
*Clean the sensors carefully with a dry cloth.
*Restart robot by turning the power switch off and on.
Free Shipping on All Orders
30-Day Money-Back Guarantee
1-Year Limited Warranty
Safe & Secure